Level 1 ASPs

Background information

As previously advised, from 1 December 2020, Level 1 Accredited Service Providers (ASP) will be required to enter a Level 1 ASP Authorisation Agreement with Essential Energy to continue to undertake and/or facilitate contestable works on or near our electricity distribution network.

Best contact email

Essential Energy will be emailing our authorisation pack commencing Monday 24 August 2020. If you would like your authorisation information to be sent to a specific email address please let us know by emailing aspinfo@essentialenergy.com.au, otherwise it will be sent to the email we have on file. For new Level 1 ASP’s who would like to become authorised please email us at aspinfo@essentialenergy.com.au.

Authorisation Agreement Pack

To become Authorised under the new framework, you will need to provide the below documentation:

All original documentation to be mailed via registered post to Essential Energy, Attention: David Wilson, PO Box 5730, PORT MACQUARIE NSW 2444

• Completed application for Authorisation CEOF2568.01
• Signed Level 1 Authorisation Agreement CEOF2568
• Evidence of your accreditation with the Department
• Copies of your certificates of currency, and

This pack will also contain the value of your bank guarantee.

Following approval, we will counter-sign the agreement and return a copy to you.

If you require assistance from Essential Energy to organise your bank guarantee, or if you would like to talk to us about the bank guarantee requirement, including the process for releasing any existing bank guarantees please reply to this email with a preferred date and time to meet. Meetings will be facilitated either by phone or Zoom with our Revenue Assurance and ASP Compliance Managers. Please ensure you have spoken to your financial institutions about their specific process and requirements ahead of the meeting.

Please note, any Ancillary Network Service fee for initial Authorisation will be waived providing the Authorisation Agreement is executed prior to 1 December 2020. Following this, please refer to the Price Schedule for Ancillary Network Service section 17.1 Authorisation of Accredited Service Providers (ASPs). Initial Authorisation fees for new ASPs & renewal charges for current ASPs will apply and your Authorisation will occur every 12 months on your accreditation renewal date.

Further information

The associated documents and a short introductory video are available on Essential Engagement/ASP located under Company Authorisation.

If you have any questions please email aspinfo@essentialenergy.com.au.

Following successful implementation of the first stage of automating the network connections process through our BetterConnect design portal, David Wilson will be acting in the Head of Commercial Services Role for a minimum of 12 months to allow Alistair Fletcher, Head of Commercial Service, to oversee roll-out of the new system across the end to end connections process.

To ensure continuing support for Accredited Service Providers and Electrical Contractors, our Network Assurance Supervisor, Kevin Miller, is now your point of contact as Acting ASP Connections and Quality Manager. Kevin’s email is kevin.miller@essentialenergy.com.au.

We will provide you with further information when it is available.

In the meantime, please continue to contact your local NAF/SNAF (Network Assurance Officer) and send any general enquiries to aspinfo@essentialenergy.com.au.

Reminder – Cable Jointing Awareness Session must be completed by 15 August 2020

Below is a copy of the communication sent on 11 June 2020. Please action prior to 15 August 2020, if you do not complete the training described below your Level 1 Authorisation will be suspended.

What is happening?

From 15 August 2020, your employees with Class 1B – Underground Paper Lead and Polymeric and Class 1C – Underground Polymeric only Authorisations must have completed a Cable Jointing Awareness session in order to remain authorised to work on or near our network.

Please ensure that all of your employees who have these authorisations complete an online awareness session prior to that date.

The awareness session is available on Essential Energy Learning Management System. To be able to access this system, you will need to:

• Complete an online registration
  • The registration will require you to create a unique user ID (ie jsmith) and password.
• Email trainingservicesadmin@essentialenergy.com.au to request enrolment in CJA001 (CJ Awareness Session)

If you have any issues with your registration, please email ekas@essentialenergy.com.au.

What do you need to do?

1. Ensure that all employees with 1B and 1C authorisations complete the awareness session prior to 15 August 2020.
2. Communicate this information to relevant members of your organisation.

Further Information

If you need further information, please email aspinfo@essentialenergy.com.au.

Essential Energy would like to share an Ausgrid Health and Safety Alert where an Ausgrid lineworker received an electric shock from an overhead streetlight conductor that was still ‘live’ within their work area.

The details of this incident are contained in the Ausgrid Health and Safety Alert that forms page 2 of Essential Energy’s Safety Brief which is available on the Document Library and on Essential Engagement/ASP.

What do you need to do?

Communicate this information to relevant members of your organisation.

Further Information

If you need further information, please email aspinfo@essentialenergy.com.au.

Reminder Confirmation of Company Safety for Live LV Work

As communicated on 17 June 2020 Level 1 ASP companies need to action the below before completing live low voltage work on the Essential Energy network. If you require the Learning Module code it is ASPLLV.

Background

Following multiple incidents relating to live low voltage (LV) work, including accidents involving actual and potential life-threatening injuries to electrical workers which raise concerns about safe work management of live work, the Independent Pricing and Regulatory Tribunal of New South Wales (IPART) issued four Safety Alerts during 2019. The three NSW distributors subsequently reviewed their related work practices, controls and the competency of their workers. Some live low voltage work activities were suspended while these reviews were undertaken.

Accredited Service Providers (ASPs) also undertake live low voltage work under the relevant Regulatory provisions for Network Operators, including the NSW framework for Contestable Work (the ASP Scheme Rules).

ASPs undertaking live LV work

Where it is appropriate for an ASP to undertake live low voltage work, you must:

• ensure that appropriate planning processes and procedures are in place to work safety in a live work situation
• have control measures incorporated into live work procedures
• identify live work responsibilities, accountabilities and authority levels of personnel or contractors, and
• ensure that anyone involved in planning or undertaking the work is trained and competent.

What your company needs to do?

• ASPs who undertake contestable work on our network are aware of their legislative obligations regarding live work
• ASPs have reviewed and updated their safe work practices and controls in line with IPART Safety Alerts regarding recent live low voltage work industry incidents, and
• ASP workers who plan and undertake live low voltage work are competent to do so.

If you have not previously accessed Essential Energy Learning Management System. You will need to create a unique user ID (i.e. jsmith) and password as part of your registration through the link above.

If you have any issues with your registration, please email ekas@essentialenergy.com.au.

What do you need to do?

1. The authorisation representative need to complete the confirmation section.
2. Communicate this information to relevant members of your organisation.

Further Information

If you need further information, please email aspinfo@essentialenergy.com.au.

What is Happening?

To comply with section 2.12 of CEOP2015, all contestable overhead and underground projects that include easements and/or allocations such as road reserves and nature strips require a surveyor’s letter stating that the network assets gifted to Essential Energy are in the locations indicated on the certified plan/s.

The surveyor’s letter must be submitted on your company letterhead with the project completion document. To assist, an example letter can be found on the Document Library.

What do you need to do?

1. Review the above and ensure these requirements are met.
2. Communicate this information to relevant members of your organisation, customers and proponents.

Further Information

If you need further information, please email aspinfo@essentialenergy.com.au.

Background

During the investigation of an ASP incident it was highlighted that Essential Energy need to raise awareness of what the Yellow Tape around specific poles represents.

The use of Yellow PVC Tape was introduced into Essential Energy’s practices at the start of 2017 to help identify a “Danger Tag” placed on Essential Energy’s Network.

A specific reference to the use of the yellow tape can be found in Essential Energy’s Electrical Safety Rules CEOP8030 – section 4.13.

4.13 Danger Tagging

‘Danger - do not operate’ tags must be attached to the controls of operable electrical apparatus to warn persons against inadvertent or unauthorised operation (that would endanger the safety of persons or the reliability and quality of supply) unless attachment to the controls is impractical. In such instances danger tags must be attached in the next best locations to affect the warning.

Danger tags associated with poles shall be attached using high visibility yellow PVC tape. Multiple danger tags can be applied with a single tape.

Danger tags are also used to secure a customer’s installation in accordance with CEOP2018 – Polarity and Neutral Identification: Testing. ASP’s or CSP’s utilising an alternate industry standard may use alternate methods to secure a customer’s installation.

‘Danger - do not operate’ tags must only be installed, altered or removed by authorised persons.

‘Danger - do not operate’ tags must also be fitted to unserviceable equipment to warn against inadvertent energisation.

Persons shall not remove or alter in any way applied danger tags without consulting the System Operator or person who attached the danger tag.

What do you need to do?

1. Ensure you always look at the most recent version of the Electrical Safety Rules on the Document Library.
2. Communicate this information to relevant members of your organisation.

Further Information

If you need further information, please email aspinfo@essentialenergy.com.au.

Friendly reminder

As per our communication on 1 June 2020 Essential Energy are requesting that all paperwork is submitted prior to 1 July 2020.

Previous communication

To assist Essential Energy in ensuring that all work completed and commissioned in the 2019-20 financial year is correctly recorded and closed in our systems, we are asking you, where practical, to please send all required paperwork.

We are also requesting that you submit a schedule to rectify all outstanding non-conformances prior to 1 July 2020. If you are unsure of your current outstanding non-conformance status, please contact your local NAF or SNAF (Network Assurance Facilitator).

What do you need to do?

Communicate this information to relevant members of your organisation.

Further Information

If you need further information, please email aspinfo@essentialenergy.com.au, or alternatively contact your local NAF or SNAF.

Background

Following multiple incidents relating to live low voltage (LV) work, including accidents involving actual and potential life-threatening injuries to electrical workers which raise concerns about safe work management of live work, the Independent Pricing and Regulatory Tribunal of New South Wales (IPART) issued four Safety Alerts during 2019. The three NSW distributors subsequently reviewed their related work practices, controls and the competency of their workers. Some live low voltage work activities were suspended while these reviews were undertaken.

Accredited Service Providers (ASPs) also undertake live low voltage work under the relevant Regulatory provisions for Network Operators, including the NSW framework for Contestable Work (the ASP Scheme Rules).

ASPs undertaking live LV work

Where it is appropriate for an ASP to undertake live low voltage work, you must:

• ensure that appropriate planning processes and procedures are in place to work safety in a live work situation
• have control measures incorporated into live work procedures
• identify live work responsibilities, accountabilities and authority levels of personnel or contractors, and
• ensure that anyone involved in planning or undertaking the work is trained and competent.

What your company needs to do?

• ASPs who undertake contestable work on our network are aware of their legislative obligations regarding live work
• ASPs have reviewed and updated their safe work practices and controls in line with IPART Safety Alerts regarding recent live low voltage work industry incidents, and
• ASP workers who plan and undertake live low voltage work are competent to do so.

If you have not previously accessed Essential Energy Learning Management System. You will need to create a unique user ID (i.e. jsmith) and password as part of your registration through the link above.

If you have any issues with your registration, please email ekas@essentialenergy.com.au.

What do you need to do?

1. The authorisation representative need to complete the confirmation section.
2. Communicate this information to relevant members of your organisation.

Further Information

If you need further information, please email aspinfo@essentialenergy.com.au.

Changes made to CEOF6013 – Outage, Connection & Work Live LV request from

Following recent incidents of outages extending beyond requested timeframes, Essential Energy has amended form CEOF6013 Request for Planned Outage, Connection or Work Live LV.

The new form will be available in the Document Library from 1 July 2020 and we request that you start using it immediately after that date.

Key changes to CEOF6013 Request for Planned Outage, Connection or Work Live LV are:

• The ASP must provide 5 days’ notice when they intend to work live LV.
• The ASP is to state the Access Permit duration time required to complete the work.
• A detailed description of works must be provided, including work areas and tasks to be undertaken.
• Additional fees will be applied for Access Permits outside of business hours.
• Outlines actions and responsibilities for the ASP when customers are affected by planned outages.
• Switching / commissioning officer has a checklist as a guide to assist with the contestable process.

Please familiarise yourself with the new form and the notes listed on page 2. If you have any questions, please contact your local Network Assurance Facilitator.

What do you need to do?

1. Review the above key changes and submit CEOF6013 version 8 from 1 July 2020. The revised CEOF6013 form will be located in the Document Library.
2. Communicate this information to relevant members of your organisation.

Further Information

If you need further information, please email aspinfo@essentialenergy.com.au.